HOME  |  BLOGS  |  PRODUCT REVIEWS  |  SHOP FOR OUTDOOR GEAR  |  FREE GEAR  |   NEWSLETTER  |  ABOUT US
 
 


Accessories > Racks > Roof Rack Bars
Roof Rack Bars

Products
Rhino-Rack Backbone Systems Rhino-Rack Backbone Systems
If you're putting a heavy load on top of your car anytime soon, be sure you've given it something to lean on with Rhino Rack's Backbone Systems. Though each of the Backbones are slightly different depending on the vehicle they're designed for, all were built with the goal of giving your roof some extra support when you weigh it down. The Jeep Wrangler-specific versions reinforce the roof line of your hard top Jeep from the inside so that it can carry up to 220 lbs of extra cargo on top. Fittingly, the Backbones created for the FJ Cruiser and Land Cruiser are slightly different. You'll have to use the FJ Cruiser Backbone bars if you want to attach Rhino-Rack's Pioneer System on top of your roof, and the same goes for the Land Cruiser-compatible version. Put your faith in the solid, unglamorous setup to make sure the racks carrying your precious cargo are secured as well as they can be en route to your destination.
Details
BUY THIS PRODUCT
$499.00
Rhino-Rack Vortex RSP 2 Bar Roof Rack Rhino-Rack Vortex RSP 2 Bar Roof Rack
The Rhino-Rack Vortex RSP 2 Bar Roof Rack is designed to fit perfectly with your vehicle's factory rack mounts for crisp, clean lines with no unsightly oversized bar hang. This rack is compatible with a range of mounting accessories and comes with molded insert cover pads to protect the bars when not in use.The 913mm front and 875mm rear combination is compatible with 2011-2016 models of the Jeep Grand Cherokee WK2 4dr SUV with Chrome Roof Rails. The 898mm front and 830mm rear combination is compatible with 2006-2013 models of the Suzuki Grand Vitara 2dr SUV with Roof Rails.
Details
BUY THIS PRODUCT
$309.00
Thule AeroBlade Edge Flush Mount Load Bar - 1 Bar Thule AeroBlade Edge Flush Mount Load Bar - 1 Bar
If you've ever opened your sunroof with your roof rack installed, you know it sounds like a dump truck full of blow dryers in a wind tunnel. For the past few years, roof rack manufacturers have been developing bars that cut down on drag and wind noise, and nobody's doing it better than Thule. The Aeroblade Edge Flush Mount load bar takes the wing shape to the next level with Thule's exclusive WindDiffuser textured surface technology, creates surface turbulence to silence wind noise. AeroBlade load bars are more than quiet, however. The bars' BoxBeam aluminum construction means these bars can withstand an incredible 800 pounds of force. They also incorporate SmartSlide technology, an integrated foot adjustment system that makes perfect positioning a snap. And, of course, AeroBlade's use Thule OneKey system, so one key can operate everything on your rack system.
Details
BUY THIS PRODUCT
$229.95
Sale Price: $182.95
Thule AeroBlade Edge Raised Rail Load Bar - 1 Bar Thule AeroBlade Edge Raised Rail Load Bar - 1 Bar
With the AeroBlade Edge Raised Rail Load Bar, it's clear that Thule isn't playing around with the security of roof rack cargo systems. Thule goes so far as to claim that the Box Beam Load Structure makes the AeroBlade the strongest aftermarket bar in the industry. Since we've never had reason to question a roof rack's carrying capacity, though, we're more enthusiastic about the easy attachment interface and fuel-saving WindDiffuser shaping, which acts like a deep aerodynamic rim for your car's roof.
Details
BUY THIS PRODUCT
$229.95
Sale Price: $182.95
Thule AeroBlade Load Bar Pair Thule AeroBlade Load Bar Pair
The wind noise from a roof rack may not seem like a big deal, but try listening to it for six months, or six years. Eventually it's just maddening, especially if you like to open your sunroof. The Thule AeroBlade Load Bars are specifically designed to eliminate wind noise, so you can open that sunroof back up and let the wind ruffle your flowing hair. The AeroBlade bars are made with a textured surface, like a golf ball, that disturbs airflow more than a smooth surface, to silence the wind. Thule calls it WindDiffuser. The load bars are made with BoxBeam aluminum extrusion, which can withstand a vertical load of more than 800 lbs. the AeroBars are easy to install, as well, because the Thule SmartSlide molded measurement system makes it easy to evenly place your towers. Finally, the SwingBlade end caps allow easy access to the T-Slot to make it easier to install your accessories.
Details
BUY THIS PRODUCT
$199.95
Sale Price: $158.95
Thule Complete CrossRoad System Thule Complete CrossRoad System
If you've ever wondered what to do with those goofy bars running front to back on your car, then the Thule Complete CrossRoad System will help turn those raised factory side rails into a multi-purpose gear-carrying machine. Four adjustable feet conform to your current side rails, and two square 50-inch load bars are rubberized for weather resistance and to keep your gear from getting scratched. Four locks are included with the feet to secure the CrossRoad System to your side rails.
Details
BUY THIS PRODUCT
$349.95
Sale Price: $278.95
Thule Load Bar Pair Thule Load Bar Pair
If you want a rack that will outlast your car, Thule is the company to turn to. Once you've added the appropriate mounting feet for your vehicle, the Thule Load Bars are your best bet to hold your precious cargo. They are available in four lengths to provide a variety of options for gear mounts. The square profile of the bars clamps securely without sliding.
Details
BUY THIS PRODUCT
$109.95
Sale Price: $86.95
Yakima 48 Inch RoundBar - 1 Pair Yakima 48 Inch RoundBar - 1 Pair
You can't have a roof rack without bars, and this pair of Yakima 48in RoundBars is as solid as they come. Just lock them into compatible towers and strap gear on directly, or mount up a gear-specific rack and haul bikes, skis, or pretty much anything else.
Details
BUY THIS PRODUCT
$89.00
Sale Price: $71.20
Yakima 86 Inch Round Bar - 1 Pair Yakima 86 Inch Round Bar - 1 Pair
Please the river rats when you fix a pair of the Yakima 86 Inch Round Bars to your rig. These bars attach to your car or truck's roof with a Yakima tower system (sold separately), and give you a seven-foot-wide platform to stack and tie-down boats when you and your wild whitewater friends shuttle to and from the river. These large bars fit best on trucks and RVs (but can work with any auto), and they provide a strong base to protect your roof and carry just about anything you can attach.
Details
BUY THIS PRODUCT
$159.00
Sale Price: $127.20
Yakima CoreBar Base Rack Bars Yakima CoreBar Base Rack Bars
Load up your vehicle on cross-country road trips and weekend adventures with the robust carrying and streamlined design of the Yakima CoreBar Base Rack Bars. Part of the new Streamline System, the CoreBar Base Rack Bars mount to Yakima's Timberline, Ridgeline, Baseline, and Skyline towers (sold separately). Its JetFlow teardrop shape slips through headwinds with effortless precision, reducing drag and quieting wind noise. Roll-form galvanized steel construction withstands heavy loads and daily use, with a vinyl-wrapped finish for corrosion-resistance in wet environments.
Details
BUY THIS PRODUCT
$119.00
Sale Price: $95.20
Yakima JetStream Base Rack Bars Yakima JetStream Base Rack Bars
Designed with a slippery JetFlow teardrop shape, the Yakima JetStream Base Rack Bars deliver aerodynamic efficiency, robust carrying performance, and quiet travel at highway speeds. Part of the new Streamline System, the JetStream Base Rack Bars mount to Yakima's Timberline, Ridgeline, and Skyline Towers (sold separately). The JetStream Base Rack Bars include two crossbars and four endcaps. Designed with wind tunnel testing, the JetStream's ultra-quiet, efficient design slips through headwinds with effortless precision. Seamless extruded aluminum provides maximum strength, courtesy of JetTruss internal support. Its anodized finish accentuates your vehicle's sharpness. Plus, its T-slot with SmartFill push-down enables easy mounting and accessory attachment without creating excess drag.
Details
BUY THIS PRODUCT
$195.00
Sale Price: $156.00
Yakima RoundBar SL Adapter Yakima RoundBar SL Adapter
The Yakima RoundBar SL Adapter allows you to gain the quiet mounting, strength, and security of the StreamLine Tower system, all without replacing your trusty RoundBars. As such, it's compatible with Yakima's Timberline, Baseline, Ridgeline, and Skyline towers. It comes with four RoundBar adapters and four Roundbar end caps.
Details
BUY THIS PRODUCT
$30.00
Sale Price: $24.00
Yakima Whispbar Flush Bar Rack Kit Yakima Whispbar Flush Bar Rack Kit
Yakima's Whispbar Flush Bar Rack Kit is designed to reduce the profile of the bars on your roof, which means less air hits them, which means that air makes less noise as it moves around your racks. The aerofoil shape is based on an airplane wing, which won't make your car fly, but it will cut through the wind. Flush model designed for vehicles with no running railsIncludes two crossbars, four towers with SKS locks, four SmartFoot mounting components with mounting pads
Details
BUY THIS PRODUCT
$275.00
Sale Price: $151.25
Yakima Whispbar Heavy Duty Bar Rack Kit Yakima Whispbar Heavy Duty Bar Rack Kit
It doesn't matter if you transport a posse of skiers, a gang of mountain bikers, or a gaggle of boaters from your home base to every good spot known to man, the Yakima Whispbar Heavy Duty Bar Rack Kit can handle the load. Heavy-duty Whispbars offer significantly reduced drag and noise while providing a sturdy, easy-to-use attachment point for your arsenal of Yakima gear racks.
Details
BUY THIS PRODUCT
$299.00
Sale Price: $239.20
Yakima Whispbar Rail Bar Rack Kit Yakima Whispbar Rail Bar Rack Kit
While your car may already be equipped with sidebars, the Yakima Whispbar Bar Rack Kit will add immeasurable usability to your roof. And while older crossbars require drilling and other permanent attachments to your automobile, the Whispbar Rail Bars only need the towers that match with your factory side rails. They are easily installed by one person with a few quick measurements and turns of the wrist. What you'll notice is that unlike many factory rack systems, the Whispbar Rails' shape mimics the shape of an airplane's wing. This was specifically designed to move air over the bars smoothly. It not only reduces drag, it also means that you won't hear them whistling on the top of your car.
Details
BUY THIS PRODUCT
$259.00
Sale Price: $142.45
Yakima Whispbar Through Bar Rack Kit Yakima Whispbar Through Bar Rack Kit
The Yakima Whispbar Through Bar Rack Kit lets you utilize every precious inch of the crossbars to carry all the gear you'll need for a weekend on the trails or out in the snow. As an added bonus, the crossbars' aerofoil shape looks a bit like an airplane wing and cuts smoothly through the air for a quiet and energy efficient ride. The Whispbar Through Bar Rack Kit comes in two kit options. The full kit includes two crossbars, four towers with SKS locks, and four SmartFoot mounts with cushioning pads. The half kit comes with one crossbar, two towers with SKS locks, and two SmartFoot mounts with cushioning pads.
Details
BUY THIS PRODUCT
$275.00
Sale Price: $220.00
Yakima WindShield Yakima WindShield
Stylishly reducing drag and quieting wind noise, the Yakima WindShield fits any of Yakima's bars, as well as most factory bars and other manufacturer's square bars. Its band-style attachment quickly secures to your rack system, with an included wrench for mounting. It comes in four sizes for fitting to different vehicles and roof rack systems.
Details
BUY THIS PRODUCT
$99.00
Sale Price: $79.20


Browse By Category
Shop by Brand Name
Shop by Product Category
Search By Keywordy




feedback  |  privacy  |  copyright